2018 OSHA’s Top 10 Most Cited Violations Part 2
Dec 11, 2018
At the 2018 National Safety Congress, OSHA’s Top 10 Most Cited Violations of the year were announced.
OSHA publishes this list to alert employers about these commonly cited standards, so they can take steps to find and fix recognized hazards addressed in these and other standards before OSHA shows up.
To view a recap of the top 5 OSHA violations for 2018, click here.
Let’s dive right in. The following is a list is the first half of the top 10 most frequently cited standards following inspections of worksites by federal OSHA, along with safety tips and various ways to protect workers as stated by osha.gov.
Falls from ladders are among the most common causes of serious work-related injuries and deaths. Employers must set up the work place to prevent employees from falling off of overhead platforms, elevated work stations or into holes in the floor and walls.
7. Powered Industrial Trucks
Determining the best way to protect workers from injury largely depends on the type of truck operated and the worksite where it is being used. Employers must ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in 29 CFR 1910.178(l)(1).
8. Fall Protection – Training Requirements
Similar to #6 ladders and protecting against fall protection, OSHA requires employers to:
- Provide working conditions that are free of known dangers.
- Keep floors in work areas in a clean and, so far as possible, a dry condition.
- Select and provide required personal protective equipment at no cost to workers.
- Train workers about job hazards in a language that they can understand.
9. Machine Guarding– General Requirement
Moving machine parts have the potential to cause severe workplace injuries, such as crushed fingers or hands, amputations, burns, or blindness. Safeguards are essential for protecting workers from these preventable injuries. Any machine part, function, or process that may cause injury must be safeguarded. When the operation of a machine or accidental contact injure the operator or others in the vicinity, the hazards must be eliminated or controlled. This page contains general information on the various hazards of mechanical motion and techniques for protecting workers. View additional resources for machine guarding.
10. Personal Protective and Lifesaving Equipment – Eye and Face Protection
Thousands of people are blinded each year from work-related eye injuries that could have been prevented with the proper selection and use of eye and face protection. Eye injuries alone cost more than $300 million per year in lost production time, medical expenses, and worker compensation.
OSHA requires employers to ensure the safety of all employees in the work environment. Eye and face protection must be provided whenever necessary to protect against chemical, environmental, radiological or mechanical irritants and hazards.
Curious to see how 2018 compares to 2017 violations? Here are the top 10 most cited violations for 2017.
1. Fall Protection (1926.501)
2. Hazard Communication (1910.1200)
3. Scaffolding (1926.451)
4. Respiratory Protection (1910.134)
5. Control of Hazardous Energy - Lockout/Tagout (1910.147)
6. Ladders (1926.1053)
7. Powered Industrial Trucks (1910.178)
8. Machine Guarding– General Requirement (1910.212)
9. Fall Protection – Training Requirements (1926.503)
10. Electrical – Wiring Methods (1910.305)
How can businesses better prepare themselves to reduce and alleviate these top 5 citations?
Ensuring that everyone who comes on site is safe, trained, and qualified to work is one of the best ways to reduce the chance of possible citations and OSHA violations. Many companies choose to outsource prequalification of contractors and suppliers to alleviate some of the administrative burden and guarantee that all contractors are held to the same standard.
For more than a dozen years, BROWZ has worked with the world’s largest organizations across more than 17 industries to implement supply chain prequalification and compliance programs.
BROWZ offers an efficient means to exchange and evaluate supplier data. Your entire business will be able to access a single repository of compliance information for all suppliers and contractors to help you assess your risk exposure, monitor compliance, and make informed supply chain decisions.
What’s more, we will independently assess the data submitted, and proactively work with your suppliers to update their information, as needed. To learn more about BROWZ and request a demo, click here.
- supply chain management
- risk management
- risk mitigation
- safety compliance
- safety statistics
- supply chain management
- contractor safety
- Supplier Management
- corporate social responsibility
- compliance management
- contractor management
- contractor pre qualification
- 2018 OSHA’s Top 10 Most Cited Violations Part 2
- BROWZ Performance Evaluations: How Post-Job Evaluations Change the Contractor Management Process
- 4 Ways to Strike the Best Deal with Contractors
- Do I Need a Contractor Verification System?
- The Cost of Contractor Verification, and How the BROWZ ROI Calculator Can Help
- The Value of Continuous Support in Building a Prequalification Program
- 7 Reasons You Should Use BROWZ Performance Evaluations
- 2018 OSHA’s Top 10 Most Cited Violations - Part 1
- New BROWZ Membership Benefit: Discounted Rates on Avis and Budget Vehicle Rentals
- Why It's Essential to Mitigate Supply Chain Risk